FP3 Floor Polish
A metallised polish for extreme strength and durability coupled with ease of removability. Non–yellowing cross linked polymer film. Does not discolour even the lightest floor. Produces a deep shine with excellent slip resistance. Responds brilliantly to all spray burnishing techniques.
Directions
FP3 Floor Polish must be applied to a clean grease free floor. Strip old polish with FS1 Floor Polish Stripper then rinse thoroughly with clean water, allow floor to dry. Apply a thin even film of FP3 Floor Polish using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). May be buffed as required to enhance gloss.
Coverage
60 square metres per litre.
Maintenance
Damp Mopping: As required using 4-Hygiene Floor Gel or 4 -Hygiene Hard Surface Cleaner. Spray cleaning/burnishing: Regular use of 4-Hygiene Gloss Shine Spray will enhance appearance and life expectancy.
| Composition | A low viscosity, opaque, cream coloured liquid, which has a slight sweet odour. It is a blend of acrylic and ethylene polymer dispersions, anionic and nonionic wetting agents, plasticisers, coalescents, humectants and a metal salt for crosslinking. |
| Appearance | Translucent emulsion |
| Colour | Cream |
| Viscosity | <10 cps |
| Density | 1.025 |
| pH | 8.0-8.2 |
| Stability | 2 years in unopened containers |
| Activity | 18% |
| Fragrance | Characteristic slightly sweet |
| Storage | Protect from freezing |
